IDE interface on the Sound Blaster Live Value [sound blaster live value] [thanks in advance]
Q: Anyone know this? Digital Audio Capture Device? Maybe?
Re:yes, i also have a friend who did something similar. plugged in an ide cable to an "ide port" on some peripheral. his cable smoked too.
i think i have pics of it. i will edit this post if i do
EDIT: found the pics.
pic1 (http://null.mindsvirge.com/pix/ide_cable001.jpg)
pic2 (http://null.mindsvirge.com/pix/ide_cable002.jpg)
Re:<< friend of mine actually connected an IDE cable from mobo to the sound card not knowing what he was doing, and the IDE cable started smoking and actually melted some of the plastic insulation… i'd recommend NOT plugging stuff in just cuz it fits unless you read where, what, and why to plug in >>
The soundblaster cable has the same number of conductors as an ATA33 IDE cable, except two of the pins are blocked on the connectors. This is to stop the cable from being plugged in the wrong way round and sending the power supply (3v, 5V, 12V? – pin1) down a signal conductor.
However.. if you have lost your soundblaster cable, DO NOT use an IDE cable because if you do happen to connect it the wrong way round you get the IDE cable smoke effect, as quoted, and also burn holes in your soundblaster pcb. (Yes.. I did it too) I think this may have also damaged the mobo as the slot always caused problems afterwards. This BE6 finally died a year later and took 2 P3's with it..one of them a 2 month old 850 :Q
..learned quite alot since then though..;)
Yoshi. 
Re:inside a pc is a definite non smoking zone! :Q
Re::D Thanks for the info. I think I will avoid plugging anything into.
Re:The IDE cable smoked!?!?! Wow . . . that's pretty cool
. I've only had a computer smoke once. Still don't understand why. I had a motherboard working in one case, took it out, then connected it up in another case (p.s. in the new case checked as good). Turned the system on and smoke came from the board (came from the voltage regulators if I'm not mistaken). I definately second guy's advice though. DON'T plug up stuff just because it fits.Re:friend of mine actually connected an IDE cable from mobo to the sound card not knowing what he was doing, and the IDE cable started smoking and actually melted some of the plastic insulation… i'd recommend NOT plugging stuff in just cuz it fits unless you read where, what, and why to plug in
Re:I think you're referring to the livedrive connector. It's used to connect . . . a LiveDrive. That's just a port for the front of the machine that has knobs and ports (sound stuff) on it. It's not an IDE connector though.
Related posts
Tags: sound blaster live value, thanks in advance