A home network router Router Trouble (I have $ 10 paypal to who gets this working for me) [netgear wireless router] [alcatel speedtouch]

Q: Ok heres my equipment –

Modem – Alcatel Speed Touch Pro (w / built-in router) – My Network 2 computer works fine on this is (w / dlink hub)

I want my notebook as a wireless connection to add. I got a Netgear Wireless Router (MR314)
I pulled the hub and ran into the modem router. I cannot figure out how to wirelessly setup
the everything working again. Since the modem is a router Im not sure what settings im looking
at into the wireless router.

Problems with my Netgear wireless router, please help. [netgear wireless router] [netgear router]

Q: We have a 4-port Linksys router into our basement. I have a Netgear wireless router for cheap on Amazon and wanted to use it as an access point with a switch.

I followed the guide here http://www.ezlan.net/router_AP.html

DCHP is disabled on the Netgear router is Netgear connected via port 3 on the Linksys to port 1 on the Netgear. Netgear has a static IP address of 192.168.100.151 (changed from 192.168.0.1) and a subnet mask of 255.255.255.0 and a gateway of 192.168.100.

Advice on setting up a home wireless [netgear wireless router] [wireless print server]

Best Answer: This may be a fault on the router. All four lan lights should never be on for any length of time unless they are connected. If it is only for a short time while it tries to connect, this is normal. Start by unplugging the modem power, is you just switch it off [...]

Connecting to Windows network using OS X [netgear wireless router] [wireless print server]

Q: I am currently connected to the Internet via a Netgear wireless router as its two other Windows computers. These two computers together with a wireless print server network. How can I participate in the network? I can connect to the desktop of one of the computers and printer, but thats it. When I try to print something, OS X says that whatever I pressed print, but nothing comes out of the printer. Can someone please help?

Need to get the wireless signal in another room [netgear wireless router] [bedroom apartment]

Q: Ive seen this link – text (http://www.ezlan.net/Distance.html) – over and over again, but thats not what Im looking for. I am in a 2-bedroom apartment and I just need to get the signal from one room to another. I have a Netgear wireless router (802.11g) and it will not go 30 feet, because there is a stove and a refrigerator between her and my roommate computer. I would buy a new antenna or something to get around having to wire to get into the other room. Please do not suggest this as I have

Earthlink Cable and Netgear wireless router question [netgear wireless router] [earthlink broadband]

Q: I am a newbie in wireless network. I have Time Warner cable comes with EarthLink broadband.

Yesterday I have Netgear MR314 wireless router and configured as manual.

I not install the Earthlink TotalAccess 2003 software, because when I connected the cable modem to from

cable the computer, I can surf the Internet. But then with the router, but a computer

could access to the Internet, my laptop with wireless PC card and Ethernet card could not Internet